The School of Architecture & Engineering Technology (SAET) is a professional school committed to preparing its graduates for excellence in the practice of architecture, construction, and electronics. The SAET consist of two divisions. The Division of Architecture offers the Bachelor of Science in Architectural Studies, the National Architectural Accrediting Board (NAAB) accredited Bachelor of Architecture, the NAAB accredited Master of Architecture and the Master of Science in Architecture - Facility Management track. The Division of Engineering Technology offers the Engineering Technology Accreditation Commission of the Accrediting Board for Engineering and Technology (ETAC-ABET) accredited Construction Engineering Technology and the accredited Electronic Engineering Technology degree. All students who wish to become creative and active leaders in either discipline are welcomed to the School’s programs. Minors in Architecture, Engineering Technology (general), Construction Engineering Technology, and Electronic Engineering Technology also are offered through the SAET.

Admission

Admission to all programs is by formal application to the university. All applications are evaluated individually on the basis of the field evidenced in a portfolio.

Faculty

The faculty are a distinguished group of people with an exceptional range of interests and talents. In addition to teaching, faculty members engage in research and professional development in energy conservation, structural systems, environmental education, low-cost housing, building use programming, architectural communications, and computer-aided design. The low faculty-to-student ratio allows close student contact with the faculty and personal academic advisement.

Students

Students in the SAET form a highly diverse group of individuals with a wide range of backgrounds and knowledge. Coming from all over the world, some students enter the SAET as high school graduates; others come as transfer students, second-degree candidates or as graduate students. Students are encouraged to become involved in the school’s professional organizations, professional fraternities, service organizations and honor societies. Student participation in these organizations provides a valuable service to the school as well as an important leadership-learning experience for members. The SAET Dean’s Council includes student representatives from both divisions and every level of the program. The council works closely with the dean on all matters of interest to students.

Building and Equipment

The Division of Engineering Technology is housed in the Benjamin Banneker complex. The Division of Architecture is housed in the Walter L. Smith Architecture building. The buildings offer a complete range of resources, sophisticated laboratories for student use, exhibition space for national and international shows and student displays, and indoor and outdoor areas for student gatherings. The computer laboratories are freely accessible to all students and science and technology laboratories are used for instruction and research in environmental controls, electronics and structures. Equipment is available for energy analysis and studies of the climate and the physical environment. A model-building and construction laboratory is equipped for presentation modeling, three-dimensional space analysis, and experimental studies.

Research

The Institute for Building Sciences (IBS) coordinates the research, service, and continuing education activities of the SAET. Through the institute, faculty and students have conducted research and service projects for state and federal government agencies, non-profit foundations and organizations, and industry. Many IBS projects have included international collaborations and funding. Projects have ranged from statistical surveys, analytical studies, and comparative investigations to laboratory-intensive evaluations of building materials and construction methods and Internet-based information dissemination systems. In addition, IBS has conducted numerous symposia, workshops, seminars, and conferences for design professionals, contractors, developers, manufacturers, public officials, and others involved in the design, construction, and management of buildings.

Special Programs and Events

SAET students’ education is greatly strengthened by visiting critics and lecturers. Therefore, distinguished guests are invited to give a broad range of views. In addition to lecturing, visitors are asked to spend additional time with students discussing potential career opportunities. A guest lecture series is offered each semester and elective courses are regularly offered. The school also realizes special opportunities to work with many state and federal agencies and to be active in helping to establish governmental policies affecting education. To enhance the curriculum, students have the opportunity to travel around the United States, the Caribbean, Central America, and Europe.

Financial Aid

A variety of financial aid sources are available to students, including federal and state loans, grants, and scholarships. Financial aid, in the manner of student loans, is not awarded by the SAET. Application must be made to Florida A&M University. Students are encouraged to file financial aid forms as early as possible prior to the scheduled deadlines. For more complete information and forms, write to: Financial Aid Office, Room 101 FHAC, Florida A&M University, Tallahassee, Florida 32307.

School of Architecture & Engineering Technology Graduate Programs

The SAET Division of Architecture offers two degree programs at the graduate level to accommodate students from different backgrounds who may have various educational and career goals. These degree programs are:

1. The Master of Architecture (M.Arch., professionally accredited program)
2. The Master of Science in Architecture–Facility Management Track (M.S. Arch.)

Types of Applicants:

Applicants to the graduate programs are generally of two types:

1. Students who have completed the equivalent of our Bachelor of Science in Architectural Studies.
2. Students who have a prior degree in a field other than architecture.

Progress and Retention Requirements

All students seeking admission to a graduate program in the SAET are required to meet all of the provisions outlined in the university Catalog for satisfactory progress and retention as determined by the School of Graduate Studies and Research. The requirements for satisfactory progress for such students are different from the general requirements for progress and retention for students admitted and enrolled in undergraduate degree programs.

Students admitted to graduate programs in the SAET who fail to maintain the required conditions for progress and retention could face termination of their graduate student status. A grade in a graduate-level course of “C” or below must be retaken. Such retakes follow different grade forgiveness policies from those that apply to undergraduate students’ grades.

Courses

• ARC 1003 Orientation To Architecture (1)
• ARC 1050 Design 1.1 (3)
• ARC 1160 Computer Application (1)
• ARC 1211 The Building Arts (3)
• ARC 1274 Introduction To Facility Management (3)
• ARC 1301 Design 1.1 (4)
• ARC 1302 Design 1.2 (4)
• ARC 2161 Advance Topics In Digital Arch (1)
• ARC 2162 CADD For Architecture (1)
• ARC 2201 Theory In Architecture (3)
• ARC 2303 Architectural Design 2.1 (4)
• ARC 2304 Architectural Design 2.2 (4)
• ARC 2470 Introduction to Technology of Architecture (3)
• ARC 2501 Architectural Structures I (3)
• ARC 2693 Building Tec For Fac Managers
• ARC 2701 Architectural History I (3)
• ARC 2702 History 2 (3)
• ARC 3058 Computer Applications In Architecture (3)
• ARC 3324 Architectural Design 3.1 (5)
• ARC 3325 Architectural Design 3.2 (5)
• ARC 3463 Materials And Methods Of Construction II (4)
• ARC 3551 Arch Structures II (3)
• ARC 3682 Environmental Technology II (3)
• ARC 3702 Architectural History 2 (3)
• ARC 3703 Architectural History 3 (3)
• ARC 4010 Facility Management (3)
• ARC 4319 Design Analysis (3)
• ARC 4341 Architectural Design 4.1 (5)
• ARC 4342 Architectural Design 4.2 (5)
• ARC 4610 Environmental Systems in Architecture (3)
• ARC 4683 Environmental Technology III (4)
• ARC 5018 Facility Management (3)
• ARC 5204 Architectural Making (3)
• ARC 5206 Advanced Architectural Theory & Philosophy (3)
• ARC 5286 Practice I (3)
• ARC 5288 Practice II (3)
• ARC 5289 Facility Management Profession (3)
• ARC 5352 Advanced Architectural Design 5.1 (6)
• ARC 5353 Advanced Architectural Design 5.2 (6)
• ARC 5361 Architectural Dsgn 1 (3)
• ARC 5362 Architectural Dsgn 2 (3)
• ARC 5363 Architectural Dsgn 3 (4)
• ARC 5364 Architectural Dsgn 4 (4)
• ARC 5397 Intro Urban Design
• ARC 5686 Advanced Plumbing Space
• ARC 6186 Modeling And Digital Fabricati (3)
• ARC 6259 Programming Theory & Practice (3)
• ARC 6278 Construct Management (3)
• ARC 6351 Whole Building Studio (5)
• ARC 6357 Graduate Design 6.1 “Critical Thinking” (6)
• ARC 6359 Graduate Design 6.2 (6)
• ARC 6373 Urban Design Studio (6)
• ARC 6624 New Technology of Enclosed Buildings (3)
• ARC 6910 Introduction to Thesis Planning & Research (3)
• ARC 6932 Master’s Seminar II (3)
• ARC 6949 Coop Internship (1)
• ARC 6970 Intro To Thesis Planning (3)
• ARC 6971 Thesis/master’s Project (v)
• ARC 6972 Thesis Studio & Research (6)
• ARC 6974 Thesis/master’s Project Planning (3)

• BCN 1221C Building Construction I (3)
• BCN 2231 Materials and Methods of Construction 2 (3)
• BCN 3240 Construction Equip & Operation
• BCN 3251 Construction Documents I (3)
• BCN 3253 Construction Accounting (3)
• BCN 3562C Electrical Systems In Construction (3)
• BCN 3566 Electro-mech Systems (3)
• BCN 3701 Construction Management II (3)
• BCN 3720 Constr Plan & Schedu (3)
• BCN 3731 Construction Safety & OSHA Certification (1)
• BCN 3797 Construction Management I (3)
• BCN 4619 Construction Estimating II. (3)
• BCN 4705 Contracts, Codes & Laws. (3)
• BCN 4782 Computer Applications For Construction Management (3)
• BCN 4941 Const Mgmt Intern (2)

• CET 2123L Microprocess Fund-l
• CET 3195L Digital Electron Lab
• CET 3468 Computer Aided Circuit Analysis (3)

• ETS 4538 Instrumentation (3)
• ETS 4538L Instrumentation Lab (1)

• EET 2036L Electrical Fundamentals II Lab (1)
• EET 2106L Electronic Devices and Circuits I Lab (1)
• EET 3107L Elec Dev Ckt II Lab (1)
• EET 3320 Communication System
• EET 3320L Communica System Lab
• EET 3321 Adv Communicat Syste
• EET 3321L Adv Comm System Lab
• EET 4165 Electronics Design I
• EET 4165L Electro Design I Lab
• EET 4166 Electr Cir Design II
• EET 4166L Elec Circui Des II L
• EET 4328 Wireless Communications (3)
• EET 4328L Wireless Communi Lab (1)
• EET 4735 Industrial Electronics and Control (3)
• EET 4735L Industrial Electronics and Control Lab (1)
• EET 4914 Electronic Engineering Technology Design Project (3)
• EET 4950 Tech Design Project Proposal

• EGS 1000 Introduction to Engineering Technology I (1)
• ETC 3211C Soil Mechanics (3)
• ETC 3211L Soil Mech & Found-l
• ETC 3211L Soil Mechanics and Foundations Lab (1)